Public utility vehicle

REFORM BOKI 2551E

REFORM BOKI COMPACT EXCAVATOR 2551E – USED EQUIPMENT
CHASSIS NO. 1039448,
CURRENTLY WITH 3,527 OPERATING HOURS

Completely Overhauled:
- Thoroughly cleaned
- Cabin repainted
- Support feet repainted
- New grapple shells
- New service: oils, filters, etc.
- UVV inspection passed

Standard Equipment:
- Handle-guided 3-wheel excavator
- Sound-damped
- Outside width adjustable from 0.83 to 1.25 m
- Speed of 0-6 km/h adjustable purely mechanically on the drawbar
- UVV approved
- GS mark "tested safety"

Engine:
- with water-cooled 4-cylinder diesel engine
- 23.2 kW / 31.5 HP at 3,000 rpm according to DIN 70020
- Displacement 1,335ccm

Electrical System:
- Alternator 14V / 35A
- Battery 12V / 63 Ah
- Work lights

Drive System:
- Hydrostatic all-wheel drive via wheel hub motors
- BOKILOCK DIFFERENTIAL LOCK SYSTEM
- Can be activated from the drawbar and switched during operation
- Stepless adjustment of the driving speed on the drawbar 0-6 km/h
- Mechanical starting protection on the drawbar
- Sensored front axle for automatic activation of the boom safety function

Chassis:
- Torsionally stiff frame made of fine-grain steel

Steering:
- The spur gear is actuated via the steering drawbar

Brake:
- Service brake via the hydrostatic drive

Tires:
- 18 x 9.50 - 8 (lawn tread)

Hydraulics:
- 2-lever joystick control on adjustable control unit
- No visual obstruction by control elements
- Pre-set hydraulic valves
- All functions controlled proportionally
- Two-circuit hydraulics
- Hydraulic tank: 40 l, operating pressure: 180 bar
- Biologically rapidly biodegradable hydraulic fluid
- Based on poly-alpha-olefins (PAO)
- Currently 4,000 operating hours change interval
- (Water hazard class 1)
Bledpfx Ao Ahyf Ujkuop

Swivel Mechanism:
- Upper carriage rotates continuously on an internally toothed slewing ring
- Locking by means of a pin in the cabin

Excavator Superstructure:
- Box-shaped boom and excavator arm made of hot-rolled MSH profiles
- Outreach 3,750 mm from the outer edge of the base frame
- Automatic detection of the operating status automatically activates the "boom lowering" function when the device is supported (this allows the pressure on the earth grab to be significantly increased in difficult ground conditions)
- Lifting force: 830 kp at 3,000 mm
- Load holding valve, pre-tension valve and hose rupture protection
- 4 two-part, hydraulic supports, play-free horizontal locking by means of forged toothed discs (unlimited adjustment options)
- Support cylinders with integrated hose rupture protection (no risk of collapse in the event of external damage to the hydraulic lines)
- Support plates with 2 locking claws

Grab Bucket:
- Earth grab / two-shell grab with integrated, central closing cylinder, grab swivel device approx. 210°
- Dimensions: 750 x 830 mm standard

Half Cabin:
- Fully closable with side window, optimal view of the work area due to glazing that extends to the floor
- Windshield can be opened
- Entrance-side curtain with window
- Folding footrest
- Weatherproof, suspended and hydraulically dampened driver's seat
- Hot water blower heater

Dimensions and Weight:
- Length / transport position: 3,600 mm
- Width: 830 mm
- Height: 2,115 mm
- Track min: 830 mm
- Track max: 1,250 mm
- Weight: 1,630 kg
- Wheelbase: 1,680 mm
- Turning radius: 1,780 mm

El anuncio se tradujo automáticamente y se pueden haber producido errores de traducción.